Cold-curing colour stable resin with short processing time. The casting time is 2 minutes and the total processing time 7 minutes. Cadmium-free. 

Indications: Partial Dentures, Repair Material, Splint Adjustments (Clear) (Colour match with Paladent 20 or Paladon 65 Heatcure)

Advantages:

• High fitting accuracy
• Certified biocompatibility
• Very good mucosa tolerance due to low residual monomer contents
• Colour-stable due to catalyst system

Process: Palapress is pourable for 2 min after mixing. After 4 min Palapress reaches a dull plastic phase of about 3 – 3.5 min, during which Palapress is stable and will not flow. Optimum polymerization without air bubbles is made in the Palamat elite pressure curing unit at 55 °C and 2 bars pressure for 20 min. Until intraoral placement, store denture in water