- Products
- Wax
- C&B Modelling Waxes
- Products
- EQUIPMENT & Accessories
- Pressure Pots & Hydro Flasks
- Kulzer Palamat Premium - Programmed Polymerisation Unit - 66076559
Kulzer Palamat Premium - Programmed Polymerisation Unit - 66076559
- Brand: Kulzer
- Product Code: K-PMP
TOP SELLER
RRP $3850.00 + GST
PALAMAT PREMIUM - SMALLER OUTSIDE, SMARTER INSIDE.
ONE WATER-BATH POLYMERISATION DEVICE FOR ALL
Palamat Premium offers a new, space-saving design, but it’s actually bigger inside, where it counts. The unit features a wider opening and greater capacity than the previous model, so even very large articulators can fit inside (Including the Artex, as this is what the market has requested). It’s the only device dental technicians need to cover most indications and polymer types (Heat and Cold Curing Acrylics)
Benefits at a glance:
User friendly
- Temperature, pressure & time always visible
- Common programmes pre-set, yet fully adaptable
- Icon-based, interactive operating menu. No languages
Everyday simplicity
- Wider opening, larger capacity & smaller footprint
- Fits standrad articulators or six dentures
- Proven pressure lock system
Clean-lab design
- Optimised surface for easy cleaning
- Improved water drainage
- Functional in all conditions and clean-wipeable
Operating parameters
- 3 Freely Configurable Programs A / B / C
- Temperature Range: 40 – 98°C
- Air Pressure: off/on [2bar]
- Timer: off/on [0:01 – 9:59 h:min]
- Prog. 1: 45°C – BAR – no pre-set timer
- Prog. 2: 55°C – BAR – no pre-set timer
- Prog. 3: 98°C –BAR – no pre-set timer
- NEW Stepped Heat Cure Setting:
- Can be selected via the temperature menn
- Hold at 70°C for 1 ½ hours, then 99°C for ½ hour
- After program is finished, hold at 70°C
- Cold curing polymers 45°C / 55°C
- Heat curing polymers 99°C
- Minimum Water Level 5cm
-
Includes: Powercord, CD With Instructions, Air Hose with One Connection Style 2 x Clamps
Optional Extra: 8mm ED Drain Hose (NOT SUPPLIED)
Compressed air connection required to suit your labs internal air lines / air fitting style if not the same as one provided with unit.
Capacity
- Up to 6 full dentures
- 1 standard articulator with denture
- 3 Palajet duo flasks
Tank Internal Dimensions:
190mm High (To Top Of Lip) x 210mm Wide Diameter
External Whole Unit Dimensions:
Height 300 mm / Required Space: approx. 450 mm
Width 305 mm / Required Space: approx. 315 mm
Depth 400 mm / Required Space: approx. 550 mm
Weight 8.6 kg
SOFTWARE UPDATE AVAILBLE - V1.0 to V1.1
For units with SN: 2020-XX-XXXX serial number or older. When you start first power on your machine, if the screen says V1.0 then you can now update to V1.1. If it already says V1.1 then your unit is already updated.
Software Update - Instructions Manual PDF
Software Download Link - www.kulzer.com/palamatpremiumupdate
NEW Stepped Heat Cure Setting
- Can be selected via the temperature menu
- Hold at 70°C for 1 ½ hours, then 99°C for ½ hour
- After program is finished, hold at 70°C
Other updated functions:
- Safety temperature of 70°C for programs over 70°C
- Standby temperature of 70°C for programs over 70°C
- Pause temperature and pressure cut-off of 90°C at Programs over 90 ° C
- The menu item "water drain" in the setup menu should only be possible at an actual temperature of a maximum of 55°C
Kulzer Palamat Premium - Programmed Polymerisation Unit - 66076559
- Brand: Kulzer
- Product Code: K-PMP
TOP SELLER
RRP $3850.00 + GST
PALAMAT PREMIUM - SMALLER OUTSIDE, SMARTER INSIDE.
ONE WATER-BATH POLYMERISATION DEVICE FOR ALL
Palamat Premium offers a new, space-saving design, but it’s actually bigger inside, where it counts. The unit features a wider opening and greater capacity than the previous model, so even very large articulators can fit inside (Including the Artex, as this is what the market has requested). It’s the only device dental technicians need to cover most indications and polymer types (Heat and Cold Curing Acrylics)
Benefits at a glance:
User friendly
- Temperature, pressure & time always visible
- Common programmes pre-set, yet fully adaptable
- Icon-based, interactive operating menu. No languages
Everyday simplicity
- Wider opening, larger capacity & smaller footprint
- Fits standrad articulators or six dentures
- Proven pressure lock system
Clean-lab design
- Optimised surface for easy cleaning
- Improved water drainage
- Functional in all conditions and clean-wipeable
Operating parameters
- 3 Freely Configurable Programs A / B / C
- Temperature Range: 40 – 98°C
- Air Pressure: off/on [2bar]
- Timer: off/on [0:01 – 9:59 h:min]
- Prog. 1: 45°C – BAR – no pre-set timer
- Prog. 2: 55°C – BAR – no pre-set timer
- Prog. 3: 98°C –BAR – no pre-set timer
- NEW Stepped Heat Cure Setting:
- Can be selected via the temperature menn
- Hold at 70°C for 1 ½ hours, then 99°C for ½ hour
- After program is finished, hold at 70°C
- Cold curing polymers 45°C / 55°C
- Heat curing polymers 99°C
- Minimum Water Level 5cm
-
Includes: Powercord, CD With Instructions, Air Hose with One Connection Style 2 x Clamps
Optional Extra: 8mm ED Drain Hose (NOT SUPPLIED)
Compressed air connection required to suit your labs internal air lines / air fitting style if not the same as one provided with unit.
Capacity
- Up to 6 full dentures
- 1 standard articulator with denture
- 3 Palajet duo flasks
Tank Internal Dimensions:
190mm High (To Top Of Lip) x 210mm Wide Diameter
External Whole Unit Dimensions:
Height 300 mm / Required Space: approx. 450 mm
Width 305 mm / Required Space: approx. 315 mm
Depth 400 mm / Required Space: approx. 550 mm
Weight 8.6 kg
SOFTWARE UPDATE AVAILBLE - V1.0 to V1.1
For units with SN: 2020-XX-XXXX serial number or older. When you start first power on your machine, if the screen says V1.0 then you can now update to V1.1. If it already says V1.1 then your unit is already updated.
Software Update - Instructions Manual PDF
Software Download Link - www.kulzer.com/palamatpremiumupdate
NEW Stepped Heat Cure Setting
- Can be selected via the temperature menu
- Hold at 70°C for 1 ½ hours, then 99°C for ½ hour
- After program is finished, hold at 70°C
Other updated functions:
- Safety temperature of 70°C for programs over 70°C
- Standby temperature of 70°C for programs over 70°C
- Pause temperature and pressure cut-off of 90°C at Programs over 90 ° C
- The menu item "water drain" in the setup menu should only be possible at an actual temperature of a maximum of 55°C