- Thermoforming Material
- Finishing Solvents & Accessories
- Products
- CLEARANCE
- Kulzer Meliodent Heatcure Acrylic POWDER ONLY - 1kg - CLEAR - WHILE STOCK LASTS - DISCONTINUED LINE
Kulzer Meliodent Heatcure Acrylic POWDER ONLY - 1kg - CLEAR - WHILE STOCK LASTS - DISCONTINUED LINE
- Brand: Kulzer
- Product Code: K-MH-C
**** WHILE STOCK LASTS - DISCONTINUED LINE BY MANUFACTURER AUGUST 2022 - SAVE 40%
**** ALTERNATIVE REPLACEMENT IS: KULZER PALADON 65 OR ACRYLX HOT CLASSIC
**** IMPORTANT: We are now out of stock of the Meliodent Liquids - THIS CAN BE USED WITH PALADON 65 LIQUID
Meliodent Heat Cure is a denture base material designed by Kulzer Dental, to make technicians working environment safer. By containing only organic pigments. Meliodent Heat Cure is free from cadmium. The surface of the denture has perfect properties that allows for excellent oral hygiene.
Compared to other products, Meliodent Heat Cure plays a special role as a denture material: it is most probably the only material with such a large variety of colours! The new Meliodent Line offers you more than 75 years of experience in the field of denture materials.
Benefits at a glance:
- Super fine polymer gives a superb flow
- Short dough time 6 minutes at 23°C
- Long working time up to 30 minutes plus (depends on room temperature)
- Economical for use in the dental laboratory
- Unique co-polymer formula
- Broad spectrum of colour shades to suit all patients
- Exceptional smooth surface
Information
- 33% more impact resistance than standard 20 min cure acrylics
- Natural Colour (Blueish purple tints with translucency)
- Well balanced properties make it economical to use and guarantee high quality dentures
- Process easily without additional equipment
- Good colour stability and a low residual monomer
- Cadium Free
- Dough Time: 6.5 minutes at 23°C
- Curing Time: 30 minutes
- Suggested Process: Place clamped flask in water, bring to boil slowly over
- 5 mins, boil for 25 mins. Bench cool for at least 10 mins, then immerse in cold water.
Indication:
- Complete Dentures
- Partial Dentures
Fabrication Technique:
- Press and pack technique
Repairing and Relining:
- Dentures made of Meliodent Heat Cure can be repaired with Meliodent Rapid Repair.
Pack and press technique: Dosage and processing Hard plaster is recommended for preparing the model and for embedding. The recommended mixing ratio is 35 g : 14 ml (powder : liquid). Introduce the liquid to the mixing beaker, add the appropriate quantity of powder rapidly and mix for approx. 1 minute with a spatula. Meliodent Heat Cure reaches its packable consistency after approx. 10 minutes, the processing time is approx. 25 minutes. The processing time is extended or reduced depending on the ambient temperature.
Polymerisation pack and press technique: Place the flask in boiling water, switch the heat source off and leave for 15 mins. Then boil for 20 mins. Allow the flask to cool down slowly in the water bath after polymerization.
Injection technique: Dosage and processing The mixing ratio is 35 g : 14 ml (powder : liquid). Place the liquid in the mixing cup, add the specified volume of powder rapidly, stir to form a homogeneous mass for approx. 1 minute and leave to swell for approx. 7 minutes. Then release the mass from the mixing cup, knead briefly by hand (wear protective gloves) and plug into the filling cylinder. The waiting time before injection from the start of mixing at 23°C (73°F) is 9–10 minutes. The waiting times depend on the room temperature and mixed volume. Close the filling cylinder using the cylinder cover and screw into the Palajet unit. Fasten flask using the centring wheel. After pulling the pressure unit forward as far as the stop, the rocker arm is moved upwards with the filling cylinder inserted and the denture acrylic injected into the flask with the aid of the pressure piston. Keep the flask under pressure in the Palajet unit for 15 minutes (rocker arm up). To check the time, set the timer to 15 minutes.
Polymerisation injection technique: Polymerisation time in the pressure vessel is 30 minutes, water temperature 100°C (212°F), pressure 2 bar.
Kulzer Meliodent Heatcure Acrylic POWDER ONLY - 1kg - CLEAR - WHILE STOCK LASTS - DISCONTINUED LINE
- Brand: Kulzer
- Product Code: K-MH-C
**** WHILE STOCK LASTS - DISCONTINUED LINE BY MANUFACTURER AUGUST 2022 - SAVE 40%
**** ALTERNATIVE REPLACEMENT IS: KULZER PALADON 65 OR ACRYLX HOT CLASSIC
**** IMPORTANT: We are now out of stock of the Meliodent Liquids - THIS CAN BE USED WITH PALADON 65 LIQUID
Meliodent Heat Cure is a denture base material designed by Kulzer Dental, to make technicians working environment safer. By containing only organic pigments. Meliodent Heat Cure is free from cadmium. The surface of the denture has perfect properties that allows for excellent oral hygiene.
Compared to other products, Meliodent Heat Cure plays a special role as a denture material: it is most probably the only material with such a large variety of colours! The new Meliodent Line offers you more than 75 years of experience in the field of denture materials.
Benefits at a glance:
- Super fine polymer gives a superb flow
- Short dough time 6 minutes at 23°C
- Long working time up to 30 minutes plus (depends on room temperature)
- Economical for use in the dental laboratory
- Unique co-polymer formula
- Broad spectrum of colour shades to suit all patients
- Exceptional smooth surface
Information
- 33% more impact resistance than standard 20 min cure acrylics
- Natural Colour (Blueish purple tints with translucency)
- Well balanced properties make it economical to use and guarantee high quality dentures
- Process easily without additional equipment
- Good colour stability and a low residual monomer
- Cadium Free
- Dough Time: 6.5 minutes at 23°C
- Curing Time: 30 minutes
- Suggested Process: Place clamped flask in water, bring to boil slowly over
- 5 mins, boil for 25 mins. Bench cool for at least 10 mins, then immerse in cold water.
Indication:
- Complete Dentures
- Partial Dentures
Fabrication Technique:
- Press and pack technique
Repairing and Relining:
- Dentures made of Meliodent Heat Cure can be repaired with Meliodent Rapid Repair.
Pack and press technique: Dosage and processing Hard plaster is recommended for preparing the model and for embedding. The recommended mixing ratio is 35 g : 14 ml (powder : liquid). Introduce the liquid to the mixing beaker, add the appropriate quantity of powder rapidly and mix for approx. 1 minute with a spatula. Meliodent Heat Cure reaches its packable consistency after approx. 10 minutes, the processing time is approx. 25 minutes. The processing time is extended or reduced depending on the ambient temperature.
Polymerisation pack and press technique: Place the flask in boiling water, switch the heat source off and leave for 15 mins. Then boil for 20 mins. Allow the flask to cool down slowly in the water bath after polymerization.
Injection technique: Dosage and processing The mixing ratio is 35 g : 14 ml (powder : liquid). Place the liquid in the mixing cup, add the specified volume of powder rapidly, stir to form a homogeneous mass for approx. 1 minute and leave to swell for approx. 7 minutes. Then release the mass from the mixing cup, knead briefly by hand (wear protective gloves) and plug into the filling cylinder. The waiting time before injection from the start of mixing at 23°C (73°F) is 9–10 minutes. The waiting times depend on the room temperature and mixed volume. Close the filling cylinder using the cylinder cover and screw into the Palajet unit. Fasten flask using the centring wheel. After pulling the pressure unit forward as far as the stop, the rocker arm is moved upwards with the filling cylinder inserted and the denture acrylic injected into the flask with the aid of the pressure piston. Keep the flask under pressure in the Palajet unit for 15 minutes (rocker arm up). To check the time, set the timer to 15 minutes.
Polymerisation injection technique: Polymerisation time in the pressure vessel is 30 minutes, water temperature 100°C (212°F), pressure 2 bar.